If you decide to use FZ1200R33KF2C in your
traction and industrial applications, you do not have to worry about
performance and reliability. FZ1200R33KF2C is a 3300V/1200A IHV 190mm single
switch IGBT diode-inverter with IGBT2. Its weight is 8.82 lbs. It is a switch
that is used in order to allow power flow in the on state and to stop power
flow when it is in the off state. It works by applying voltage to a
semiconductor component, therefore changing its properties to block or create
an electrical path. You will be more than satisfied with its build quality. The
module is very sturdy and highly dependable. It is manufactured by Infineon
Technologies AG, a prominent semiconductor supplier from Germany. Infineon is
famous for their sophisticated product lineup, which addresses three central
challenges to the modern society: energy efficiency, mobility, and security.
Eupec is the previous name of Infineon Technologies.
FZ1200R33KF2C features high energy consistency
for compact inverter models. Its housing is standardized too. It is an IGBT
device that combines the voltage characteristics of a biopolar transistor
(collector – emitter) and the drive characteristics of a MOSFET. The target
applications of FZ1200R33KF2C are Motor Control and Drives, Railway Traction,
Wind Energy Systems, Commercial, Agriculture and Construction Vehicles (CAV)
etc.
In today's competitive & dynamic
environment, there is a continuous pressure to find new methods to increase
energy efficiency, mobility and security in all motor control applications. At
the same time, software's progressively important role in systems directly
contributes to their complexity and increases costs. Today's motors are
increasingly driven via electronic controls, which provide better control of
speed, position, and torque, as well as much better efficiency, rather than via
direct connection to their source of power (whether AC or DC). To do this, the
motor-control circuit must switch the current flow to the motor's coils on and
off quickly, with minimal switching-time or conduction-period losses in the
switch itself. That's where FZ1200R33KF2C is used. This semiconductor device
serves the needs of motor drive and power control. This electrically
controllable switch controls the current flow path to two or more motor coils.
This allows full control of the motor speed and direction. FZ1200R33KF2C is
such a module which is widely used in different machineries and apparatuses.
A hybrid vehicle system consists of an electric
motor, a battery and an inverter. An electric power conversion system is needed
to supply electrical energy from the battery to the motor, and to store energy
generated by the motor in the battery. The inverter is used as that power
conversion system FZ1200R33KF2C is one of the most common modules to use as the
main switching device in this electric power conversion system.
There are some specific motor control
applications which FZ1200R33KF2C are most suitable for. These are brushed DC
motor, brushless DC motor, induction motor, servo motor, stepper motor,
switched reluctance motor, permanent magnet synchronous motor, Industrial
automation etc.
No comments:
Post a Comment