VI-264-CU

The VI-200 family is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. More than 14 million units of this family have been shipped and customers are very happy with the performance and reliability of the modules. These converters have set the standard for high power, low noise, reliability and ease-of-use in the component power industry. Thousands of combinations of input voltages, output voltages and power levels means not having to compromise when selecting modules for your power system. VI-264-CU is one of the members of this family. It offers exceptional power density, efficiency, noise performance, reliability and ease of use. Output overvoltage protection and thermal shutdown are two great features of VI-264-CU. You can buy VI-264-CU  from our website.

VI-200-CX

If you are searching for an isolated DC-DC converter with great power density, efficiency, noise performance, reliability and ease of use, VI-200-CX can be an fantastic choice. This full brick, through hole module is a member of VI-200 family from Vicor. The VI-200 family, with over 14 million units shipped, is broad series of “zero-current-switching” component-level DC-DC converters from Vicor. The output power of VI-200-CX is 75W and output voltage is 5V. Module Size: 4.6" x 2.4" x 0.5"(116,8 x 61,0 x 12,7mm) and Operating Temperature: -25°C ~ 85°C. It is able to provide up to 90% efficiency. Some features and benefits of VI-212-IU are cULus & cTLus, remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture, CE Marked, Low noise FM control etc. You can buy VI-200-CX  from our website.

VI-264-EU

VI-264-EU is a member of VI-200 family from Vicor. With more than 14 million units sold, VI-200 is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Functioning at frequencies up to 2MHz, VI-200 series converters offer outstanding power consistency, efficiency, noise performance, reliableness and usability. Booster modules (VI-Bxx) provide an easy, cost-efficient, ready-for-service solution for higher power output needs. One or more boosters may be utilized to create synchronous arrays able to provide several kilowatts of output power. VI-264-EU’s input voltage: 300V (200V-400V), output Voltage: 48 V and output Power: 200 W. Its operating temperature is -10°C ~ 85°C and the mounting type is through hole. The length, width and height are 116.80 mm, 61.0 mm and 12.7 mm respectively. It’s efficiency is 88%. The package is Full Brick. Some of VI-221-CW’s features: Remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture, low noise FM control, CE marked etc. You can buy VI-264-EU  from our website http://www.uscomponent.com.

V375C5C100BG

V375C5C100BG is extensively used in applications like industrial and process control, distributed power, medical, ATE, communications, defense and aerospace etc. This quarter brick DC-DC isolated converter module from the micro family of Vicor uses advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High frequency ZCS/ZVS switching of V375C5C100BG provides high power density with low noise and high effciency. The output voltage and output power of V375C5C100BG are 5V and 100W. Module size: 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) and mounting type is through hole. It can deliver up to 81.8% efficiency, when operated between -20°C ~ 100°C. You can buy V375C5C100BG  from our website http://www.uscomponent.com.

V375B48C300BG

V375B48C300BG is an excellent 9-DIP DC-DC converter module from the Mini family of Vicor. It is a great choice for applications such as: Off-line systems with auto-ranging or PFC front ends, industrial and process control, distributed power, medical, ATE, communications, defense and aerospace etc. Having features like: single-wire paralleling, logic enable / disable, input undervoltage lockout, output overvoltage protection etc. it works exceedingly well as a mature power component. If you want performance, flexibility, reliability and cost effectiveness in a single DC-DC converter module, V375B48C300BG would be a great choice. The output voltage and output power of V375B48C300BG are 48V and 300W. Module size: 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm) and mounting type is through hole. It can provide up to 89% efficiency, when operated between -20°C ~ 100°C. You can buy V375B48C300BG  from our website http://www.uscomponent.com.

VI-2W2-IU

The VI-200 series of DC-DC converters from Vicor have set the standard for high power, low noise, reliability and ease-of-use in the component power industry. Thousands of combinations of input voltages, output voltages and power levels means not having to compromise when selecting modules for your power system. These power modules are field proven with an installed base of over 15 million units. VI-2W2-IU is a member of this family. Compact and efficient, VI-200 converters feature wide input voltage ranges, remote sense, enhanced output programmability, and low standby dissipation. Power boosters provide a simple, cost-effective solution for higher power requirements up to kilowatts. VI-2W2-IU products also offer output overvoltage protection and thermal shutdown. The electronic circuitry is a fully encapsulated for protection in harsh environments.

VI-J62-EW

VI-J62-EW is a half brick isolated DC-DC converter module from the MiniMod family of Vicor. The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. The output power and output voltage of VI-J62-EW are 100W and 15V respectively. Its operating temperature is -10°C ~ 100°C and the mounting type is through hole. The length, width and height are 57.9 mm, 61 mm and 12.7 mm respectively. Some features of VI-J62-EW are ZCS power architecture, low noise FM control, logic disable etc. You can buy VI-J62-EW  from our website http://www.uscomponent.com.

V48B28C250BL

V48B28C250BL is a DC-DC converter module with isolated output from Mini family of Vicor. Its high frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. The output voltage and output power of V48B28C250BL are 28V and 250W. Module size: 2.28" x 2.2" x 0.5" (57,9 x 55,9 x 12,7 mm). It uses advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. Its mounting type is through hole and it can provide up to 90% efficiency. The minimum and maximum operating tempearature of this module are -20°C and 100°C respectively.The main use of V48B28C250BL are Distributed power, medical, ATE, communications, defense and aerospace etc. You can buy V48B28C250BL  from our website http://www.uscomponent.com.

V48C5C50BL

V48C5C50BL is a quarter brick isolated DC-DC converter module from Vicor. It uses advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost effectiveness of a mature power component. High frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. It is parallelable, with N+M fault tolerance. The output voltage and output power of V48C5C50BL are 5V and 50W. Module size: 2.28" x 1.45" x 0.5" (57,9 x 36,8 x 12,7 mm) and mounting type is through hole. It can provide up to 84.5% efficiency, when operated between -20°C ~ 100°C. V48C5C50BL got great features such as: input undervoltage lockout and output overvoltage protection. You can buy V48C5C50BL  from our website http://www.uscomponent.com.

VI-212-IU

If you are looking for an isolated DC-DC converter with exceptional power density, efficiency, noise performance, reliability and ease of use, VI-212-IU can be an excellent choice. This full brick, through hole module is a member of VI-200 family from Vicor. The VI-200 family, with over 14 million units shipped, is broad series of “zero-current-switching” component-level DC-DC converters from Vicor. The output power of VI-212-IU is 200W and output voltage is 15V. Module Size: 4.6" x 2.4" x 0.5"(116,8 x 61,0 x 12,7mm) and Operating Temperature: -40°C ~ 85°C. It is able to provide up to 90% efficiency. Some features and benefits of VI-212-IU are cULus & cTLus, remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture etc. You can buy VI-212-IU  from our website http://www.uscomponent.com.

MI-260-MW

MI-260-MW is a full brick, through hole isolated module, which belongs to MI-Series of DC-DC converters from Vicor. This series is designed for applications utilizing distributed power architecture and is based on VI-200 / VI-J00 family of zero-current switching from Vicor, component-level DC-DC converters. Operating at frequencies up to 1 MHz, the MI-Series offers state-of-the-art performance in terms of power density, efficiency, noise, ease-of-use, and reliability. Industry standard package from Vicor enables the MI-Series to meet MIL-STD-810 environmental requirements for humidity, fungus, salt, fog, explosive atmosphere, acceleration, vibration, and shock. Output power and output voltage of MI-260-MW are 100W and 5V respectively. The operating temperature range is -55°C ~ 85°C. Standard features such as wide-output trimming/programming, current limiting, remote sense, logic enable/disable, and latching OVP and OTP combine to offer a high degree of protection, versatility, and reliability for military power systems. You can buy MI-260-MW  from our website http://www.uscomponent.com.

V375A24C600AL3

V375A24C600AL3 is an isolated DC-DC converter module from Vicor. Its ZCS / ZVS power-processing architecture enables efficient, low-noise, high-frequency operation. The main switch is common drain for improved thermal and noise management, the reset switch located within the primary control IC is common source for ease of control. The control circuitry is integrated into two (primary and secondary side) ICs. The result is a significant reduction in parts with the ensuing savings in cost and increase in reliability. This integration also provides extra room for the power train. Some benefits of V375A24C600AL3 are high efficiency and power density in a brick package, simplified "brick" mounting and thermal management, robust packaging with operating temperature from -55 to 100°C etc. You can buy V375A24C600AL3  from our website http://www.uscomponent.com.

VI-240-IV

VI-240-IV is a full brick isolated converter module from VI-200 series of Vicor. The VI-200 family, with over 14 million units shipped, is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Operating at frequencies up to 2MHz, VI-200 family converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. The flexibility of Vicor’s power components is also available in half-size, half-power VI-J00 MiniMods. The output power and the output voltage of VI-240-IV are 150W and 5V respectively. The module size is 4.6" x 2.4" x 0.5"(116,8 x 61,0 x 12,7mm). Its operating temperature is -40°C ~ 85°C. Some features and benefits of VI-240-IV are cULus & cTLus, up to 90% efficiency, remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture etc. You can buy VI-240-IV  from our website http://www.uscomponent.com.

V48A12C500BG

V48A12C500BG is a 12V 500W isolated DC DC converter module made by Vicor. It uses advanced power processing, control and packaging technologies to provide the performance, flexibleness, reliableness and cost efficiencies of a mature power component. This maxi converter from Vicor is used in applications such as: industrial and process control, distributed power, medical, ATE, communications, defense and aerospace etc. The high frequency ZCS/ZVS switching of V48A12C500BG provides high power density with low noise and high effectiveness. Its highest operating temperature is 100°C at full load, mounting type is through hole and efficiency is up to 89%. The length, width and height are 117.00 mm, 55.9 mm and 12.7 mm respectively. The package is Full Brick. Some of V48A12C500BG’s benefits: low noise zero current switching and zero voltage, Input surge withstand: 100V for 100ms, parallelable with N+M fault tolerance, logic enable / disable, input undervoltage lockout, output overvoltage protection etc. You can buy V48A12C500BG  from our website http://www.uscomponent.com.