VI-JW2-IW by USComponent.com - IGBT Distributor

VI-JW2-IW is a half brick 15V 100W isolated DC/DC Converter. Its operating temperature is -40°C ~ 100°C and the mounting type is through hole. The length, width and height are 61 mm, 57.9 mm and 12.7 mm respectively. VI-JW2-IW belongs to VI-J00 MiniMod family from Vicor which is proven by an installed base of over 8 million units. By using “zero-current-switching” forward converter technology from Vicor, VI-JW2-IW combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a highest operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibility for power system designers to meet demanding time to market requirements. You can buy VI-JW2-IW  from our website http://www.uscomponent.com.

M-FIAM3HN1 by USComponent.com - IGBT Distributor

M-FIAM3HN1 is a 270v DC front-end in Filter Input Attenuator Module that provides EMI filtering and transient protection, and inrush current limiting in DC-DC applications. Its Output Current is Up to 25A. The FIAM family from Vicor enables designer using Vicor Maxi, Mini, and Micro DC-DC converters, and in select cases V•I Chip based devices, to meet the transient immunity and EMI requirements of the standards referenced in the respective model datasheet. M-FIAM3HN1 works in conjunction with a specific set of Vicor converters to deliver optimal efficiency, power and protection. You can buy M-FIAM3HN1  from our website http://www.uscomponent.com.

V300A5C400BN

V300A5C400BN is a full brick DC-DC converter module from Vicor. It is a member of maxi family, which provides high power density and low noise, with advanced power processing in a robust package. With Through Hole mounting system, its output voltage is 5V and output power is 400W. The length, width and height are 117.0 mm, 56.0 mm and 12.7 mm respectively. V300A5C400BN use advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost-effectiveness of a mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. You can buy V300A5C400BN  from our website http://www.uscomponent.com.

MI-J20-IY

Vicor MI-J00 family of DC-DC converters is designed for applications utilizing distributed power architectures. MI-J20-IY is a memeber of this family. Based on Vicor VI-200 / VI-J00 family of zero-current switching, component-level DC-DC converters, the MI-J00 family offers exceptional performance in terms of power density, efficiency, noise, ease of use, and reliability. MI-J20-IY meets the steady-state input voltage requirements of MIL-STD-704D/E/F for 270VDC input. The output voltage can be externally trimmed or programmed from 50% to 110% of nominal output. Current limiting, remote sense, and an inhibit pin all combine to offer a high degree of protection, versatility, and reliability for power systems. Fully encapsulated in Vicor’s industry standard package, MI-J20-IY meets MIL-STD-810 environmental testing requirements for humidity, fungus, salt-fog, explosive atmosphere, acceleration, vibration, and shock. You may buy MI-J20-IY from our website here http://www.uscomponent.com.

V375A5C400AL

The Maxi, Mini, Micro family of DC-DC converters from Vicor provides high power density and low noise, with advanced power processing in a robust package. V375A5C400AL is a member of this family. It is compact and efficient and it got enhanced output programmability, remote sense, and single-wire paralleling for high power or for true redundant operation. V375A5C400AL has an extended temperature range (-55 to 100°C). Some of its features are: Single-wire paralleling, Output voltage adjust 10 – 110%, Logic enable/disable, Input undervoltage lockout, Output overvoltage protection, Overtemperature shutdown etc.

VI-J60-CW

VI-J60-CW is a half brick 5V 100W isolated DC/DC Converter from Vicor’s VI-J00 MiniMod family, which established a different standard in component-level DC-DC converters. Its mounting type is through hole and operating temperature is -25°C ~ 100°C. The length, width and height are 61.0 mm, 57.9 mm and 12.7 mm respectively. Using Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, VI-J60-CW combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. It will provide you up to 90% efficiency. Some of VI-J60-CW’s features: Low noise FM control, CE Marked, Remote sense and current limit, ZCS power architecture, Logic disable etc. You may buy VI-J60-CW from our website here http://www.uscomponent.com.

VI-HAM-EM

VI-HAM-EM is a universal AC input PFC front-end Harmonic Attenuator Module that has been optimized for use with Vicor’s V375 series of DC DC converters. Its length, width and height are 116.90 mm, 61.0 mm and 12.7 mm respectively. It may be used with any combination of V375 series DC DC converters which are available in Micro, Mini and Maxi packages with up to 600 Watts of output power. The combination of the high-boost VI-HAM-EM with V375 DC DC converters results in a power conversion system with twice the power density, fewer components and lower cost compared to previous HAM-based solutions. In addition, the VI-HAM-EM is fully compatible with Vicor’s VI-26x and VI-J6x series DC DC converters. This gives designers the freedom to choose from the industry’s broadest selection of DC DC converters with outputs from 2 to 95VDC, 50 – 600 Watts. The user need only provide external hold-up capacitors, a few discrete components, and a line flter (available from Vicor).

VI-J63-CW

Vicor’s VI-J00 MiniMod family established a differnt standard in component-level DC-DC converters. VI-J63-CW is a half brick 24V 100W isolated DC/DC Converter from this family. The length, width and height are 57.9 mm, 53.4 mm and 12.7 mm respectively. Its operating temperature is -25°C ~ 100°C and the mounting type is through hole. It’s RoHS compliant (VE verisons). VI-J63-CW will provide you up to 90% efficiency. Using Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. Some of VI-J63-CW’s features: Low noise FM control, CE Marked, Remote sense and current limit, ZCS power architecture, Logic disable etc. You may buy VI-LJN1- CY from our website here http://www.uscomponent.com.

VI-LJN1- CY

VI-LJN1- CY is a member of Vicor's MegaMod and MegaMod Jr. groups of single, double and triple output DC-DC converters. It gives power system designers with cost saving, high performance, ready-for- service solutions for applications that might otherwise need a custom supply. Integrating standard VI-200 or VI-J00 Family converters in tough, case mount packages, MegaMod and MegaMod Jr's. can be ordered with single, double or triple outputs, having a consolidated output power of up to 600W. Completely separated outputs take out efficiency penalties and output interaction issues. You may buy VI-LJN1- CY from our website here http://www.uscomponent.com.

VI-J51-CW

VI-J51-CW is a half brick 12V 100W isolated DC/DC Converter from VI-J00 family. Its operating temperature is -25°C ~ 100°C and the mounting type is Flange. The length, width and height are 57.9 mm, 53.4 mm and 12.7 mm respectively. The VI-J00 MiniMod family embedded a different sizer in component-level DC-DC converters. This “lesser” size complement to the higher power VI-200 family offers up to 100W of isolated and controlled power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibiliy for power system designers to meet demanding time to market requirements. Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. You may buy VI-J51-CW from our website here http://www.uscomponent.com.

V24A24M400BL by USComponent.com - IGBT Distributor

V24A24M400BL is a DC DC converter from Vicor’s maxi family. This DC-DC converter module uses advanced power processing, control and packaging technologies to provide the performance, flexibleness, reliableness and cost efficiencies of a mature power component. High frequency ZCS/ZVS switching provides high power density with low noise and high effectiveness. Its main applications are industrial and process control, distributed power, medical, ATE, communications, defense and aerospace. V24A24M400BL’s input voltage: 18 V (18 V - 36 V), output Voltage: 24 V and output Power: 400 W. Its operating temperature is -55°C ~ 100°C and the mounting type is through hole. The length, width and height are 116.80 mm, 55.9 mm and 15.7 mm respectively. It’s efficiency is 88.2%. The package is Full Brick. Some of V24A24M400BL’s features: low noise zero current switching and zero voltage, single-wire paralleling, logic enable / disable, input undervoltage lockout, utput overvoltage protection etc. You may buy V24A24M400BL from our website here http://www.uscomponent.com.

VI-221-CW

VI-221-CW is a member of VI-200 family from Vicor. With more than 14 million units sold, VI-200 is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Functioning at frequencies up to 2MHz, VI-200 series converters offer outstanding power consistency, efficiency, noise performance, reliableness and usability. Booster modules (VI-Bxx) provide an easy, cost-efficient, ready-for-service solution for higher power output needs. One or more boosters may be utilized to create synchronous arrays able to provide several kilowatts of output power. VI-221-CW’s input voltage: 36 V (21 V - 56 V), output Voltage: 12 V and output Power: 100 W. Its operating temperature is -10°C ~ 85°C and the mounting type is through hole. The length, width and height are 116.80 mm, 61.0 mm and 12.7 mm respectively. It’s efficiency is 88%. The package is Full Brick. Some of VI-221-CW’s features: Remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture, low noise FM control, CE marked etc. You may buy VI-221-CW from our website here http://www.uscomponent.com.

VI-264-EU-03-F2

VI-264-EU-03-F2 is a member of VI-200 family from Vicor. With more than 14 million units sold, VI-200 is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Functioning at frequencies up to 2MHz, VI-200 series converters offer outstanding power consistency, efficiency, noise performance, reliableness and usability. Booster modules (VI-Bxx) provide an easy, cost-efficient, ready-for-service solution for higher power output needs. One or more boosters may be utilized to create synchronous arrays able to provide several kilowatts of output power. VI-264-EU-03-F2’s input voltage: 300 V (200 V - 400 V), output Voltage: 48 V and output Power: 200 W. Its operating temperature is -10°C ~ 85°C and the mounting type is through hole. The length, width and height are 116.80 mm, 47.2 mm and 20.1 mm respectively. It’s efficiency is 88%. The package is Full Brick. Some of VI-264-EU-03-F2’s features: Remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture, low noise FM control, CE marked etc You may buy VI-264-EU-03-F2 from our website here http://www.uscomponent.com.

VI-JW2-IY

A new criterion was set up by the VI-J00 MiniMod family in component-level DC-DCconverters. This “smaller” size supplement to the higher power VI-200 family presents up to 100W of separated and control power in a board mounted package. With a large number of input/output/power amalgamation, and with a highest working temperature rating of 100°C, the MiniMod gives almost limitless flexibleness for power system designers to cope with challenging time to market demands. VI-JW2-IY is a half brick 15V 50W isolated DC/DC Converter from VI-J00 family. Its operating temperature is -40°C ~ 100°C and the mounting type is through hole. The length, width and height are 61 mm, 57.9 mm and 12.7 mm respectively. You may buy VI-JW2-IY from our website here http://www.uscomponent.com.

Mercado global del IGBT 2017-2022

El informe de investigación explora las principales consultas de mercado del mercado global de IGBT después de realizar un análisis completo, intelectual y exhaustivo de la industria de IGBT. El informe ayuda a los proveedores clave, fabricantes de estos modulos ttransitores bipolares y sus respectivos usuarios finales a obtener mejores perspectivas, activos y perspectivas de los segmentos de mercado de IGBT. Las principales zonas topográficas cubiertas en el informe; son Medio Oriente y África, América del Norte, América Latina, Europa y Asia-Pacífico. De esta forma, se completan las facetas conflictivas de la industria, incluidos los esquemas industriales, los cronogramas y los enfoques aparentes. También borra los criterios cruciales como la información de contacto de la empresa, incluida la dirección de correo electrónico, direcciones de sitios web y números de teléfono, grupo de industria IGBT, clasificación, proporción de orden de suministro, asignación de ventas, costo / precio del producto y proveedores clave.

Los vendedores recientes que son nuevos en el negocio de los modulos encuentran problemático competir con el oponente del mercado existente que ya tiene cierto lugar establecido, ubicado en todo el mundo. Este estudio de mercado será útil para los ejecutivos de la industria, gerentes de productos, ventas, analistas y consultores. También se establece una descripción amplia de planes y políticas, distribución de productos IGBT, políticas económicas y de comportamiento. Los profesionales y expertos realizan investigaciones primarias y secundarias para recopilar las estadísticas necesarias de dicho producto y mercado, al considerar el análisis FODA (Fortalezas, Debilidades, Oportunidades y Amenazas). Ofrece una idea aproximada de las materias primas utilizadas en los negocios de esta rama, las tecnologías innovadoras, el alcance y los arreglos cambiantes de los canales de comercialización de IGBT.