VI-240-IV

VI-240-IV is a full brick isolated converter module from VI-200 series of Vicor. The VI-200 family, with over 14 million units shipped, is Vicor’s broad series of “zero-current-switching” component-level DC-DC converters. Operating at frequencies up to 2MHz, VI-200 family converters offer exceptional power density, efficiency, noise performance, reliability and ease of use. The flexibility of Vicor’s power components is also available in half-size, half-power VI-J00 MiniMods. The output power and the output voltage of VI-240-IV are 150W and 5V respectively. The module size is 4.6" x 2.4" x 0.5"(116,8 x 61,0 x 12,7mm). Its operating temperature is -40°C ~ 85°C. Some features and benefits of VI-240-IV are cULus & cTLus, up to 90% efficiency, remote sense and current limit, logic disable, wide range output adjust, ZCS power architecture etc. You can buy VI-240-IV  from our website.

V48A12C500BG

V48A12C500BG is a 12V 500W isolated DC DC converter module made by Vicor. It uses advanced power processing, control and packaging technologies to provide the performance, flexibility, reliableness and cost efficiencies of a mature power component. This maxi converter from Vicor is used in applications such as: industrial and process control, distributed power, medical, ATE, communications, defense and aerospace etc. The high frequency ZCS/ZVS switching of V48A12C500BG provides high power density with low noise and high effectiveness. Its highest operating temperature is 100°C at full load, mounting type is through hole and efficiency is up to 89%. The length, width and height are 117.00 mm, 55.9 mm and 12.7 mm respectively. The package is Full Brick. Some of V48A12C500BG’s benefits: low noise zero current switching and zero voltage, Input surge withstand: 100V for 100ms, parallelable with N+M fault tolerance, logic enable / disable, input undervoltage lockout, output overvoltage protection etc. You can buy V48A12C500BG  from our website.

VI-JW2-IW

VI-JW2-IW is a half brick 15V 100W isolated DC/DC Converter. Its operating temperature is -40°C ~ 100°C and the mounting type is through hole. The length, width and height are 61 mm, 57.9 mm and 12.7 mm respectively. VI-JW2-IW belongs to VI-J00 MiniMod family from Vicor which is proven by an installed base of over 8 million units. By using “zero-current-switching” forward converter technology from Vicor, VI-JW2-IW combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. The VI-J00 MiniMod family established a new standard in component-level DC-DC converters. This “junior” size complement to the higher power VI-200 family offers up to 100W of isolated and regulated power in a board mounted package. With thousands of input/output/power combinations, and with a highest operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibility for power system designers to meet demanding time to market requirements. You can buy VI-JW2-IW  from our website.

M-FIAM3HN1

M-FIAM3HN1 is a 270v DC front-end in Filter Input Attenuator Module that provides EMI filtering and transient protection, and inrush current limiting in DC-DC applications. Its Output Current is Up to 25A. The FIAM family from Vicor enables designers using Vicor Maxi, Mini, and Micro DC-DC converters, and in select cases V•I Chip based devices, to meet the transient immunity and EMI requirements of the standards referenced in the respective model datasheet. M-FIAM3HN1 works in conjunction with a specific set of Vicor converters to deliver optimal efficiency, power and protection. You can buy M-FIAM3HN1  from our website.

V300A5C400BN

V300A5C400BN is a full brick DC-DC converter module from Vicor. It is a member of maxi family, which provides high power density and low noise, with advanced power processing in a robust package. With Through Hole mounting system, its output voltage is 5V and output power is 400W. The length, width and height are 117.0 mm, 56.0 mm and 12.7 mm respectively. V300A5C400BN use advanced power processing, control and packaging technologies to provide the performance, flexibility, reliability and cost-effectiveness of a mature power component. High-frequency ZCS/ZVS switching provides high power density with low noise and high efficiency. You can buy V300A5C400BN  from our website.

MI-J20-IY

Vicor MI-J00 family of DC-DC converters is designed for applications utilizing distributed power architectures. MI-J20-IY is a member of this family. Based on Vicor VI-200 / VI-J00 family of zero-current switching, component-level DC-DC converters, the MI-J00 family offers exceptional performance in terms of power density, efficiency, noise, ease of use, and reliability. MI-J20-IY meets the steady-state input voltage requirements of MIL-STD-704D/E/F for 270VDC input. The output voltage can be externally trimmed or programmed from 50% to 110% of nominal output. Current limiting, remote sense, and an inhibit pin all combine to offer a high degree of protection, versatility, and reliability for power systems. Fully encapsulated in Vicor’s industry standard package, MI-J20-IY meets MIL-STD-810 environmental testing requirements for humidity, fungus, salt-fog, explosive atmosphere, acceleration, vibration, and shock. You may buy MI-J20-IY from our website here.

V375A5C400AL

The Maxi, Mini, Micro family of DC-DC converters from Vicor provides high power density and low noise, with advanced power processing in a robust package. V375A5C400AL is a member of this family. It is compact and efficient and it got enhanced output programmability, remote sense, and single-wire paralleling for high power or for true redundant operation. V375A5C400AL has an extended temperature range (-55 to 100°C). Some of its features are: Single-wire paralleling, Output voltage adjust 10 – 110%, Logic enable/disable, Input undervoltage lockout, Output overvoltage protection, Over temperature shutdown etc.

VI-J60-CW

VI-J60-CW is a half brick 5V 100W isolated DC/DC Converter from Vicor’s VI-J00 MiniMod family, which established a different standard in component-level DC-DC converters. Its mounting type is through hole and operating temperature is -25°C ~ 100°C. The length, width and height are 61.0 mm, 57.9 mm and 12.7 mm respectively. Using Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, VI-J60-CW combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. It will provide you up to 90% efficiency. Some of VI-J60-CW’s features: Low noise FM control, CE Marked, Remote sense and current limit, ZCS power architecture, Logic disable etc. You may buy VI-J60-CW from our website here https://www.uscomponent.com/product-rfq.php.

VI-HAM-EM

VI-HAM-EM is a universal AC input PFC front-end Harmonic Attenuator Module that has been optimized for use with Vicor’s V375 series of DC-DC converters. Its length, width and height are 116.90 mm, 61.0 mm and 12.7 mm respectively. It may be used with any combination of V375 series DC-DC converters which are available in Micro, Mini and Maxi packages with up to 600 Watts of output power. The combination of the high-boost VI-HAM-EM with V375 DC-DC converters results in a power conversion system with twice the power density, fewer components and lower cost compared to previous HAM-based solutions. In addition, the VI-HAM-EM is fully compatible with Vicor’s VI-26x and VI-J6x series DC-DC converters. This gives designers the freedom to choose from the industry’s broadest selection of DC-DC converters with outputs from 2 to 95VDC, 50 – 600 Watts. The user need only provide external hold-up capacitors, a few discrete components, and a line filter (available from Vicor).

VI-J63-CW

Vicor’s VI-J00 MiniMod family established a different standard in component-level DC-DC converters. VI-J63-CW is a half brick 24V 100W isolated DC/DC Converter from this family. The length, width and height are 57.9 mm, 53.4 mm and 12.7 mm respectively. Its operating temperature is -25°C ~ 100°C and the mounting type is through hole. It’s RoHS compliant (VE verisons). VI-J63-CW will provide you up to 90% efficiency. Using Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. Some of VI-J63-CW’s features: Low noise FM control, CE Marked, Remote sense and current limit, ZCS power architecture, Logic disable etc. You may buy VI-J63-CW from our website here https://www.uscomponent.com/product-rfq.php.

VI-LJN1- CY

VI-LJN1- CY is a member of Vicor's MegaMod and MegaMod Jr. groups of single, double and triple output DC-DC converters. It gives power system designers with cost saving, high performance, ready-for- service solutions for applications that might otherwise need a custom supply. Integrating standard VI-200 or VI-J00 Family converters in tough, case mount packages, MegaMod and MegaMod Jr's. can be ordered with single, double or triple outputs, having a consolidated output power of up to 600W. Completely separated outputs take out efficiency penalties and output interaction issues. You may buy VI-LJN1- CY from our website here http://www.uscomponent.com/product-rfq.php.

VI-J51-CW

VI-J51-CW is a half brick 12V 100W isolated DC/DC Converter from VI-J00 family. Its operating temperature is -25°C ~ 100°C and the mounting type is Flange. The length, width and height are 57.9 mm, 53.4 mm and 12.7 mm respectively. The VI-J00 MiniMod family embedded a different sizer in component-level DC-DC converters. This “lesser” size complement to the higher power VI-200 family offers up to 100W of isolated and controlled power in a board mounted package. With thousands of input/output/power combinations, and with a maximum operating temperature rating of 100°C, the MiniMod provides nearly unlimited flexibility for power system designers to meet demanding time to market requirements. Utilizing Vicor’s “zero-current-switching” forward converter technology, proven by an installed base of over 8 million units, the MiniMod family combines state of the art power density with the efficiency, low noise and reliability required by next generation power systems. You may buy VI-J51-CW from our website here.