VI-HAM-EM

VI-HAM-EM is a universal AC input PFC front-end Harmonic Attenuator Module that has been optimized for use with Vicor’s V375 series of DC DC converters. Its length, width and height are 116.90 mm, 61.0 mm and 12.7 mm respectively. It may be used with any combination of V375 series DC DC converters which are available in Micro, Mini and Maxi packages with up to 600 Watts of output power. The combination of the high-boost VI-HAM-EM with V375 DC DC converters results in a power conversion system with twice the power density, fewer components and lower cost compared to previous HAM-based solutions. In addition, the VI-HAM-EM is fully compatible with Vicor’s VI-26x and VI-J6x series DC DC converters. This gives designers the freedom to choose from the industry’s broadest selection of DC DC converters with outputs from 2 to 95VDC, 50 – 600 Watts. The user need only provide external hold-up capacitors, a few discrete components, and a line flter (available from Vicor).

VI-JW2-IY

A new criterion was set up by the VI-J00 MiniMod family in component-level DC-DCconverters. This “smaller” size supplement to the higher power VI-200 family presents up to 100W of separated and control power in a board mounted package. With a large number of input/output/power amalgamation, and with a highest working temperature rating of 100°C, the MiniMod gives almost limitless flexibleness for power system designers to cope with challenging time to market demands. VI-JW2-IY is a half brick 15V 50W isolated DC/DC Converter from VI-J00 family. Its operating temperature is -40°C ~ 100°C and the mounting type is through hole. The length, width and height are 61 mm, 57.9 mm and 12.7 mm respectively. You may buy VI-JW2-IY from our website here http://www.uscomponent.com.